Membranes
Endurance
DuPont™ Tyvek® is a unique nonwoven material made from 100% high-density polyethylene fibers randomly laid (not woven) and compressed to form extremely strong sheets, with specific applications where durability and tear resistance are of paramount importance. Tyvek® withstands repeated folding and bending without tearing. It can be glued, laminated, sewn, stitched, and fixed.
Tyvek® combines the characteristics of paper, film, and fabric, making it ideal for a wide range of applications.
Lightweight
Tyvek® is an extremely light and flexible material. It features a remarkable strength-to-weight ratio.
Tear resistant
DuPont™ Tyvek® is built to perform in tough, durable, and extreme conditions. Water, chemicals, heat, cold, rough handling and prolonged outdoor use. Tyvek® is tear, puncture, water, UV and chemical resistant.
Resistant to water and chemicals
When wet, paper absorbs moisture and disintegrates. Tyvek® repels water, keeping the structure completely intact. Tyvek® is unaffected by most acids, bases, and salts. It has excellent rot and mold resistance and is stain resistant.
Tyvek® can withstand temperatures from -70°C to +118°C. However, at around 80°C some deformation may occur. Tyvek® is made of high-density polyethylene, which can burn; therefore, Tyvek® should not be considered fire-resistant. The only exception is Tyvek® FireCurb®, a fire-resistant breathable membrane for commercial and residential buildings that does not support combustion and is self-extinguishing.
Made from high-density polyethylene (HDPE) fibers, Tyvek® is 100% recyclable, just like plastic bottles.
Single-layer, highly vapor-permeable, waterproofing, air-tight membrane. It is laid directly on the roof panels or on top of the insulation for warm roofs. Also suitable for wall cladding of wooden modular houses.
Composition:High-density polyethylene
Dimensions:
1.5m x 50m
1.5m x 100m
2.8m x 100m
DuPont™ Tyvek® Metal is a vapor-permeable, waterproof roofing underlayment membrane with an upper
surface of polypropylene threads. Its use leads to a reduction in condensation, ensuring
of micro ventilation, and increasing thermal insulation efficiency. Reduces sound transmission
and allows micro condensation to drain.
Composition: Polypropylene, polyethylene, and aluminum coating.
Vapor permeability Sd: 0.03m
Thickness of Product/Functional layer: 7.40 / 0.22 mm
Gr/m2: 350 g/m2
DuPont™ FireCurb brings the water impermeability and high vapor permeability of Tyvek materials, but is enhanced with flame retardant properties. The membrane is self-extinguishing when ignited, and its coating reduces the formation of smoke and burning droplets. It is mainly used for wall cladding of all types of buildings - from bungalows to high-rise buildings. It is laid on the outside of the insulation, it can also be used as a solution for ventilated facades and wooden structures.
Composition: High-density polyethylene.
Functional layer: 175 micron
Vapor permeability Sd: 0.015 (EN ISO 12572 (C)
Water column: 1.3 m (EN20811)
Reaction to fire: B-s1,d0 (EN13501-1) if installed loosely, on mineral wool and cement boards; D-s2, d2 (EN13501-1) if installed on wood
Temperature resistance: -40 to +100 C
UV resistance: 4 months without coating
DuPont™ TYVEK UV FACADE is a highly vapor-permeable, waterproofing membrane, that protects against UV rays. It is intended for the protection of open and ventilated facade systems.
Composition: Polyethylene high density and polypropylene.
Vapor permeability: 0.035 – 0.05 m
Water column: 3 m (EN20811)
Temperature resistance: -40 to 80 C
UV resistance: 6 months without covering
DuPont™ Tyvek Housewrap
Single-layer, highly vapor-permeable membrane. It is mainly used for wall-cladding
wooden modular houses as well as steel and concrete structures. The membrane is placed on
the surface fixed directly to plywood/OSB or insulation. Composition: Polyethylene with high
density.
Functional layer: 175 microns
Vapor permeability Sd: 0.01 (EN ISO 12572 (C)
Water column: 1.5 m (EN20811)
Temperature resistance: -40 to +100 C
UV resistance: 4 months without covering
DuPont™ AirGuard® Reflective is a 100% air-tight membrane with a metalized surface and very low emissivity. Combined with unventilated space increases significantly
thermal insulation of the building. Composition: Polypropylene, polyethylene, and aluminum coating.
Vapor permeability: 2000 m (EN 1931)
Temperature resistance: -40 to +80 C
Gr/m2: 149 g/m2